OMNI FIT™ Premium Connectors for RF Cables and Jumpers
Bringing outstanding electrical performance and watertight durability to any installation up to 6 GHz
PrimeLine TowerBooster: 6GHz and 11GHz Dual-Band, Dual-Pol Microwave Antennas
Double or quadruple capacity on long-haul microwave links using a single, high-performance antenna
SerenityLine® 3ft Class 4 Super High-Performance Antennas
Increase link capacity in high-density environments
Smart Fixing Solution (SFS) Clamp Series
Ensures a safe and reliable RADIAFLEX cable installation in harsh environmental tunnel conditions
CompactLine® RapidConnect Microwave Antennas
Pre-assembled 3-, 4- and 6-ft antennas that accelerate deployments, lower installation costs
High-Performance Rapid-Fit HELIFLEX® Connectors with O-Ring Sealing
Connectors feature excellent gas tightness, ensure extremely low losses and are very easy to install
DragonSkin UL 2196 Certified Coaxial Cable
Fire-resistant, half-inch coaxial cable is key to maintaining in-building communications during fires
Hybrid and Fiber-Only Jumpers for Small Cell 5G mmWave Radio Deployments
Delivering the solutions mobile operators need for a smooth evolution to 5G
Future-Ready RADIAFLEX® Radiating Cables
RFS delivers the only ultra-broadband 5G ready cable to deliver in-tunnel MIMO
High Wind, High Ice Microwave Antennas
Featuring an extreme radome that's designed for the harshest conditions
ShareLite 3.5 GHz Small Cell Diplexers
Extremely compact, high-performance diplexers – covering 80 MHz to 5.9 GHz – simplify evolution to 5G anywhere in the world
HYBRIFLEX 12x24 Riser Cables
Accelerates network evolution to 5G
Elliptical Broadband Antenna to Power the Repack
RFS expands broadcast portfolio to provide continued repack support for US broadcasters experiencing timeline changes
Premium Jumpers Support 5G and Small Cell Network Densification
Broadcast Auxiliary Service Filter
Interference Mitigation Filter rejects all AWS-1 and AWS-3 spectrum emissions while passing Broadcast Auxiliary Channels 1 through 10
Dual Band Microwave Antennas
Combining Traditional and E-band Frequencies in a Single Antenna Will Result in CAPEX/OPEX Savings and Provide Higher Capacities over Longer Distances
1.4GHz Three-Column Multi-Band Antennas for LTE Applications
Ultra-Wideband (1400-2690MHz) Design Supports New and Legacy Frequencies from a Single Antenna
SerenityLine™ Class 4 Microwave Antennas
Increase Link Capacity in High-Density Environments
8-port TDD Beamforming Antenna for the 3.5GHz band
Enables Increased LTE Network Densification & Preparation for 5G Rollout
Small Cell Diplexers
Designed for maximum performance with the smallest size and lowest weight available in the industry
C03 Series of OMNI FIT™ Connectors
New High-Performance Standard Connectors From RFS Deliver an Ideal Combination of Features and Pricing
CELLFLEX® SecureFit Jumpers With New Weatherproofing Boot
Easy-to-Install, Competitively Priced Boot Ensures Watertight Sealing Ideal for Extreme Environmental Conditions
Complete CPR Cable Product Portfolio – Safety Is Key
RFS Launches New CPR-Compliant Series of Cables for Indoor Applications
Red Plenum Coaxial Cables Ideal for Public Safety Applications
Best-In-Class Cables Support iDAS and oDAS for Emergency Communications
P02 Series of Radiating Cable Connectors
RFS Connectors Specifically Designed to Meet Operators’ Needs for Lower Passive Intermodulation (PIM)
RADIAFLEX® RAYA Radiating Cables
World’s First Ultra RF-broadband, Vertically Polarized Radiating Cable for MIMO Applications Enables Highest Data Rates
600MHz Antennas and Conditioning Products
Enables Telecom Operators to Utilize New Spectrum to Achieve Greater LTE Capacity
Next Generation of RF X-TREME Base Station Antennas
New design minimizes width, supports more low band ports and provides MIMO enabling features
Broadcast Connector Kits for Air Dielectric Cables
Kits Include all Necessary Components for Easier Ordering and Installation
RF X-TREME APXVHCWW*XD Base Station 65 °Antennas
RFS’ 8-Port Broadband 65° Antenna Series Enables the Network Expansion Desired By Operators Without Increasing Costs
RFStar™ UHF Slotted Array Antenna
RFS Utilizes Proven “Slot” Design Technology and Applies it to their Full Range of UHF RFStar™ Antennas in USA
RFS Passive DAS Antennas
Four New Broadband Indoor Antennas feature PIM-Optimized Compact, Lightweight Design
RFS Factory-Fit Jumpers: Trust the Leader in Wireless Infrastructure
At RFS we understand that the performance comes down to the individual elements. That’s why we invented seam-welded, corrugated coaxial cables - and continue to innovate with our exceptional line of factory-fit jumper cables.
CPRI Interface Panel Kits
Cost-Effective Kits Include CPRI Box and RFS’ Industry-Leading Fiber Jumpers
RFS Smart Pole - Modular Urban Telecom Infrastructure
RFS introduces a new range of modular urban telecom infrastructure, including its Smart Pole solution, a highly modular platform enabling small cell deployment that combines wireless coverage, intelligent lighting, green power and smart sensors.
Smart city powered by RFS - Urban solutions for smart partners
RFS introduces a new range of modular urban telecom infrastructure, including our smart pole, a green power, ibeacon system, transparent antennas, InvisiLine™ Small-Form Antennas (SFAs), auto-alignment antennas (AALs), and a variety of products and solutions to meet the needs of 4G and future 5G networks.
Next Generation ShareLiteTM Combiners
RFS releases products to support broader frequency ranges and auto DC sense
4.3-10 Field-Installable Connectors
Ultra-Stable, Low PIM Connectors Ideal Match for Coaxial Cables
PEP Lite Antenna Series for Broadcast Applications
RFS PEPL Antenna Panel Array Offers Lower Wind Load
PEP Panel Array Antennas for Broadcast Applications
RFS PEP Broadband Panel is Ideal Building Block for Integration Into Complex Antenna Arrays
Passive System Components for DAS
RFS Unveils 90 New High-Performance Passive DAS Components
HCS Hybrid Connector
RFS Expands FTTA Portfolio with New HCS Hybrid Connector
High-Power 3dB Directional Coupler (DC618E-HP)
RFS Introduces High-Power 3dB Coupler for Transmitter and Channel Combining in the UHF TV Band
HYBRIFLEX™ – Connecting People Worldwide via High-Performance Wireless Infrastructure
For more than 100 years, RFS has been developing high-performance solutions for the telecommunications industry, offering unique, cost-effective solutions and future proof products, and helping people and organizations worldwide to communicate wherever they are.
Variable Gain Tower Mounted Amplifiers
RFS Variable Gain Tower Mounted Amplifiers Optimize Uplink Signals to Ensure Seamless Coverage
Ultra-Broadband RF X-TREME™ Triple-Band Antennas
RFS’ latest additions to RF X-TREME™ product family are Ideal for triple-band site upgrades and MIMO 4x4
Small Form E-Band Antenna
RFS’ new SFA04-W800 E-Band antenna features a lightweight, ultra-small design with excellent electrical performance
Low-Inductance HYBRIFLEX™ Cabling Solutions
Reduced DC Cable Inductance Solves Power-Cycling Problem During Peak Traffic
PIM-Optimized, Plenum-Rated ¼” Factory-Fit Jumpers
RFS enhances in-building portfolio with low loss, flexible jumpers ideal for tight indoor installations
RFS releases products for AWS-3 spectrum
RFS’ new Tower Mounted Amplifiers, Diplexers and Triplexer are designed to ensure the seamless transition from AWS to AWS-3
SiteExpress™ - Simplifies Installations with Factory-Assembled Tower Top Component Solutions
A pre-configured and tested SiteExpress™ is built with market-leading, field tested and proven wireless infrastructure solutions.
RFS's new Dehydrator simplifies configuration, enables flexibility in the field
700MHz Tower Mounted Amplifiers
New RFS UltraAmp Tower Mounted Amplifiers optimize uplink signals to ensure seamless coverage
700MHz RF X-TREME Base Station Antennas
RFS introduces FWW series of base station antennas designed for high frequency spectrum bands up to 2360 MHz
E-Band Antennas for 71-86 GHz Frequency Bands
RFS extends CompactLine® Easy range with 1ft and 2ft E-Band antennas for front and backhauling applications
Premium Performance Radiating Cable Connectors Support Quick, Easy and Reliable Installation
RFS announces PIM-Rated Radiating Cable Connectors for highest quality connector-cable interface
Bend-Insensitive Fiber Jumpers for Last Mile Fiber Connections
RFS introduces 100% Pre-Tested Assemblies to complement RFS’ HYBRIFLEX Portfolio
DAS Portfolio enhanced with Low PIM Directional Couplers & Power Dividers
RFS Introduces More Cost-Effective Products to Support In-Building Wireless Applications
OMT Offering Now Available for Microwave Antennas
RFS introduces OMTs Compatible with Multiple Antennas – Upgrade to Four Ports/ODUs on a Single Antenna
HYBRIFLEX™ Installation Tools
Simplify Installation of HYBRIFLEX™ Hybrid Feeder Cabling Solution! Save time and money with RFS’ HYBRIFLEX Installation Tools.
DC-FIT™ converter is designed to connect a DC cable with an existing coaxial cable run. It features innovative technology that turns an existing coaxial foam dielectric feeder into a RRU power supply.
HYBRIFLEX™ STANDARD / STANDARD-LTE
HYBRIFLEX™ STANDARD and STANDARD-LTE, used with RRUs requiring 1 or 2 pairs of fiber per head, cuts installation time in half
RF X-TREME™ Ultra-Broadband Antennas
RF X-TREME UBB delivers high performance gains across both low and high frequency bands to support all LTE/4G/MIMO evolutions with a single, flexible antenna
SC/SCX 3ft CompactLine® Easy Antennas
RFS introduces the industry’s most compact and lightest 3ft microwave antennas to overcome backhaul challenges and reduce total cost of ownership
Plenum-rated, LTE-ready antennas for In-building applications feature premium PIM-rating
New plenum-rated Omni-directional antennas can be concealed for improved aesthetics while meeting stringent building codes
HYBRIFLEX™ DIRECT-LTE, used with LTE RRHs requiring 2 pairs of fiber per head, cuts installation time in half
Aluminum 1/2” Plenum-rated Wideband Cable
RFS introduces ICA Lite, aluminum plenum-rated wideband coaxial cable providing a cost-effective, lighter weight alternative to copper cabling
Bias-Tees Ideal for LTE Network Upgrades
Save time and money with new RFS ultra-wideband bias-tees for LTE 700 and LTE 2600
Dual Axis Mechanical Tilt Sensor
The RFS AISG 2.0 compliant, dual axis RFS Mechanical Tilt Sensor is a simple-to-install in-line device that accurately measures the position of antennas in real-time without physically having to check the placement on site.
PIM-Rated, LTE-Ready Indoor Antenna
The addition of this new PIM-certified Omni antenna, I-ATO2-698/2700JPL, for 698-2700 MHz rounds out RFS’ portfolio of products for indoor applications - which also includes plenum-rated cables, connectors, tools and jumpers – enabling RFS to provide all components required to support indoor passive DAS installations.
RF X-TREME™ Base Station Antennas
RF X-TREME™ platform for high performance multi-band capability enables LTE Evolution and capacity additions with minimal impact on current network and site designs.
White Jacketed ½” Plenum-Rated Wideband Cable
RFS expands Passive DAS Cabling Offerings with New White Jacketed Coaxial Plenum-Rated Cable
Plenum-Rated Factory-Fit Jumpers
Plenum-rated factory-fit jumpers provide a time-saving, cost effective, and high-performance solution and address the need for short runs of coaxial cable
RFS 6 GHz Category A CompactLine® Antennas
RFS Debuts 6 GHz Category A SB6-W60B Microwave Antennas with High-Speed Wind Stability Up To 250 km/h
RFS Plenum-Rated Cable
The Radio Frequency Systems (RFS) plenum-rated wideband cables, tested up to 6 GHz, deliver outstanding electrical performance and support all wireless in-building applications
Ultra-Wideband Microwave Antenna
The new RFS microwave antennas are the first in North America to cover the unlicensed band (5.725 to 5.85 GHz), the lower 6 GHz band (5.925 to 6.425 GHz), the upper 6 GHz band (6.425 to 6.875 GHz) and the 7 GHz band (6.875 to 7.125 GHz) in a single antenna.
RFS WindMaster™ APXVLL13N-C
The New WindMaster TM APXVLL13N-C base station antenna from Radio Frequency Systems features best-in-class gain for exceptional coverage and a sleek new radome design that dramatically reduces wind load. This side-by-side quad antenna supports multiple technologies, such as 4xN MIMO and 4-way RX DIV, to seamlessly add capacity without increasing tower loading.
RFS’ Dual & Quad Pol High Band Base Station Antennas with UBB Technology Ideal for LTE testing worldwide
Replacing or adding antennas to accommodate different technologies or frequencies delays time-to-market, is expensive and can lead to difficult negotiations with landlords. With the RFS Ultra-Broadband Antennas, operators can invest once then effectively forget about antenna replacement issues and focus on evolving their business.
Tower Mounted Amplifier
RFS is pleased to introduce a twin GSM1800 Tower Mounted Amplifier (TMA) to their extensive line of TMAs. This TMA utilizes our new hardware platform that features a unique and extremely reliable assembly and integrations method. It is designed for 1800 MHz site deployments that require improved receiver sensitivity and enhanced site coverage.
OMNI FIT Premium Connectors
RFS’ new line of RF-connectors features design breakthroughs for best-in-class performance and value. OMNI FIT Premium guarantees hassle-free installation, safe sealing, plus the lowest PIM levels in the industry.
Quad Pol Variable Electrical Tilt Antennas
APXVRR13-C 1710-2200 MHz - 1.3m – VET - 18dBi APXVRR20-C 1710-2200 MHz - 1.9m – VET - 18.7dBi
700 MHz Wideband Antennas
APX75-86 Series - 698-896MHz 40° 65° & 80° - Fixed Electrical Tilt Antennas
Dual Band, Variable Electrical Tilt Antennas
Dual Band 790-960 / 1710-2200 MHz - 1.3m, 2.1m, 2.7m - VET Tilt: 0° to 10° ; Horizontal Beamwidth: 65° ; Gain: From 15.5-19dBi
Peak Power+ line of filters and combiners
The Peak Power+ line of filters and combiners have been specifically conceived for the very high peak-to-average power ratio nature of digital television (DTV), and represent a breakthrough in coaxial filter technology.
High Band, Broadband Variable Electrical Tilt Optimizer® Antennas
APXV18-206516H Series - 1710 - 2200 MHz - 18.1dBi - 1.3m VET APXV18-206517H Series - 1710 - 2200 MHz - 19.0dBi - 1.9m VET
CELLFLEX®Lite is the industry’s ultimate, evolutionary, corrugated aluminium transmission line, and the lightest RF transmission cable on the market today. The light-weight design coupled with its single and multiple bending-radius capabilities, allow fast installation and make it ideal for congested tower-top applications.
SlimLine® FCC Cat. ‘A’ compliant 3ft 11GHz Dual Pol Antenna
Radio Frequency Systems’ 3ft, 11GHz -dual polarized- FCC Category A (SUX3-107BF) compliant antenna is yet another breakthrough in microwave antenna design. This addition to RFS’s SlimLine® family range continues to provide innovative solutions for point-to-point communications in the 11-GHz band, and is an ideal option for ongoing backhaul applications.
Optimizer CELlite BSA
Assisting fast-track wireless network deployments across the globe, Radio Frequency Systems has launched the new high-performance Optimizer CELlite base station antenna (BSA) series. The slimline dual-polarized Optimizer CELlite antenna series complements RFS’s popular vertically-polarized CELlite variant, providing users with an extremely stable and lightweight antenna solution.
Mobile TV RF filters
To prevent interference between co-located broadcast mobile TV and phone services, Radio Frequency Systems has developed three new mobile TV-ready RF filter solutions. The new filters—a 2kW and a 5kW low-pass filter, plus a 0.6kW UHF band-pass filter with integrated low-pass filter—deliver premium RF performance across the 470 to 862MHz band.
UHF mobile TV antennas
Radio Frequency Systems’ range of lightweight and compact UHF mobile TV antennas are specially designed for co-locating at mobile base stations. This comprehensive suite of vertically polarized omnidirectional antennas includes the ultra-lightweight HU6 series, the compact multi-channel CTV series, the cost-effective broadband MTV-4 and the high-power broadband SDV-4 antennas.
Network Element Manager (NEM) software
Radio Frequency Systems has launched version three of its innovative Network Element Manager (NEM) software—NEM-ALD-S 3.0. The industry’s only platform-independent network management software, NEM-ALD-S 3.0 simplifies antenna line device interrogation and streamlines network management—from set-up, through to operation.
Ultra-lightweight broadband WiMAX filters
Radio Frequency Systems has unveiled an entirely new family of dual ultra-lightweight RF filters designed for worldwide interoperability for microwave access (WiMAX) applications. Founded on the company’s patented polymer-based air-cavity filter technology, the filter family boasts a body-weight of just 300g (10 ounces)—less than 50 percent of that of competing WiMAX filter solutions.
The new Optimizer dual-band BSA series is one of the most compact dual-band antenna series in its class, and boasts one of the shortest dual-band antenna radomes on the market today.
RFS is proud to present an AISG compliant end-to-end solution set that allows precise remote control and monitoring of tower-top RF components.
The modular mid-power ClearFill®Space 1-Solution is the first fully plug-and-play system of its kind on the market and is ideal for 2G and 3G applications.
RFS Ferrocom ferrite devices
The new suite of RFS Ferrocom ferrite isolators and circulators is specially engineered to enhance stability, performance and reliability of RF systems by compensating for mismatch between system components. The devices are ideal for a wide range of commercial mobile and public safety base stations, plus RF and microwave systems.